Everyone wants to have sparkling,
clear water when they go swimming. Pool filters
are part of the trio that controls this. The three components are filtration,
circulation and sanitation. When these three things are working properly you
will have the beautiful clear water than you desire.

There are three main types of pool filters used today. The
types are diatomaceous earth, sand and cartridge. In our area, sand and
cartridge are the most popular types. Whichever type you use, one of the key
things that will determine if it works correctly is that it is large enough.
Pool filters that are too small cannot do the job properly. If all other
elements are correct and your filter is functioning but not doing the job, this
may be your problem.

Pool filters do not last forever and eventually need to be
replaced. If you use a sand filter
there are many things that can determine that it is time to replace the sand
bed in your filter. Use of certain chemicals or a large amount of sunbathing
oil in the water can lead to the sand needing to be replaced. Your sand filter
needs to be backwashed when the pressure builds to 8-10 pounds of pressure over
the normal clean reading. If the amount of time between backwashes gets shorter
and shorter, you may need to replace the sand.

Cartridge pool
filters are a popular choice. You do not backwash a cartridge filter. It is
removed and a hose is used to wash away the dirt. This is done when the
pressure gauge reads 8-10 pounds above normal, the same as with sand filters.
Over time, the cartridge will lose its effectiveness and need to be replaced.

The pool professionals at Your Pool Products have years of
experience and are always glad to answer your questions. Call them for advice
the next time you need pool filters.